Removing dashboard pointers
Since this is done differently in different cars, I would recommend downloading the factory instructions directly to your model. In some cases, everything is quite simple, but sometimes you have to make an effort. This master class is about how to transform the appearance of the dials of the dashboard, so I will not go into details about how I managed to remove the dashboard .
It's quite easy to remove the sensor pointers. However, you need to remember the arrows, because they easily break. For convenience, you can use tweezers.The main thing is patience and consistency in actions. Alternatively, the arrow can be podkovyrnut fork. If it is stuck, then heat it with a building or regular hair dryer. So plastic will expand and come off more easily.
Removing the dial
Normally the dial rests on screws or small bolts. Find them and carefully remove the plate. Additionally, it can hold onto small plastic mounts that secure it. Understand how the fastening mechanism is arranged and remove the dial.
Draw the appearance of the future dial
After removing the dial, the first thing I did was scan it. Then I imported the image into a vector graphics editor, and traced the outlines of the plate.Thus, I do not have to measure out the exact size of the dial. Next, I finished designing the look of the new pointer and printed it on adhesive paper. I used paper with a matte surface, and the image was applied with a color laser printer. You can use inkjet printer with photo paper, but the laser image will be of higher quality.
It’s time to clear the old dial
You need to remove the paint from the dial. In order not to damage the plastic from which the dial is made, I used 70% isopropyl alcohol. The use of solvents for this work is undesirable. Soaking the dial in alcohol softened the paint, and after a few minutes it easily retired, and in front of me lay two clean plates.
It's time to cut out the stickers. We take scissors and carefully cut out the desired shape.Now sticking.
In order to avoid the formation of bubbles when gluing, you need to thoroughly clean the surface of the dial. Peel off a small portion of the sticker from the paper and align it with your dial. Gradually stick adhesive paper. To do this, you can hold it with your index finger or a plastic card. After the paper is completely glued, cut the corresponding holes in it.
Attach a scatter plate to the dial
The light from the light bulbs on the dashboard can be unevenly distributed, making some parts of the dial brighter. In order for the light to fall uniformly, you need to attach a diffusing plate to the dial. In my case, I used a plate removed from a cracked LCD monitor.After cutting out the necessary shapes, I glued them to the back of the dials. Note:
You can also add a few extra LED lamps, but this is a topic for another master class.
Since we make the appearance of our dashboard more enjoyable, it is time to change the lamps. It's pretty simple to do. You just need to rotate the lamp holder counter-clockwise a little and then pull the lamp out of it. In my car panel was highlighted with five lamps with a yellow glow. I replaced them with LED.
Date: 21.10.2018, 19:01 / Views: 61451